Origin 200™ and Origin 200 GIGAchannel™
Maintenance GuideList of Figures
| Table of Contents | List of Figures | List of Tables |
- Figure 1-1. Turning Off the Front Power Switch
- Figure 1-2. Removing the Plastic End Caps
- Figure 1-3. Removing the Chassis From the Rack
- Figure 1-4. Chassis on a Work Surface
- Figure 1-5. Removing the System Cover
- Figure 1-6. Removing the Chassis Access Cover (CPU Module)
- Figure 1-7. Removing the Chassis Access Cover (GIGAchannel Expansion Cabinet)
- Figure 1-8. Attaching a Grounding Wrist Strap to the Chassis (CPU Module Shown)
- Figure 2-1. Locating the PCI Option Slots
- Figure 2-2. Removing a PCI Slot Blanking Plate
- Figure 2-3. Example PCI Board With Feature Connectors
- Figure 2-4. Attaching a Feature Connector Cable to the PCI Backplane
- Figure 2-5. Attaching a Feature Connector Cable to the PCI Board
- Figure 2-6. Securing the PCI Option Board to the Chassis
- Figure 2-7. Location of PCI Slots in a GIGAchannel Expansion Cabinet
- Figure 2-8. Removing the Blanking Plate From a GIGAchannel Expansion Cabinet
- Figure 2-9. Installing a PCI Option Board in a GIGAchannel Expansion Cabinet
- Figure 2-10. Removing a PCI Option Screw and Board
- Figure 2-11. Replacing a PCI Option Board Blanking Plate and Screw
- Figure 2-12. Removing a PCI Board From a GIGAchannel Expansion Cabinet
- Figure 2-13. Replacing the PCI Blanking Plate in a GIGAchannel Expansion Cabinet
- Figure 2-14. Loosening the XIO Board Retaining Plate
- Figure 2-15. Sliding the Retaining Plate Aside
- Figure 2-16. Removing an XIO Slot Blanking Card
- Figure 2-17. Installing an XIO Board
- Figure 2-18. Sliding the XIO Board Retaining Plate Over the XIO Slots
- Figure 2-19. Tightening the XIO Retaining Plate Screws
- Figure 2-20. Loosening the XIO Board Retaining Plate
- Figure 2-21. Sliding the XIO Board Retaining Plate Aside
- Figure 2-22. Removing an XIO Board From a GIGAchannel Expansion Cabinet
- Figure 2-23. Installing an XIO Blanking Card in a GIGAchannel Expansion Cabinet
- Figure 2-24. Sliding the XIO Board Retaining Plate Over the XIO Slots
- Figure 2-25. Tightening the XIO Retaining Plate Screws
- Figure 3-1. Locating DIMMs in the Origin200 Server
- Figure 3-2. DIMM Pair Grouping in the Origin200 Server
- Figure 3-3. Installing a DIMM
- Figure 3-4. Locating DIMMs in an Origin200 Server
- Figure 3-5. DIMM Pair Grouping in the Origin200 Server
- Figure 3-6. Removing DIMMs
- Figure 4-1. Location of the GIGAchannel Expansion Cabinet Status LED
- Figure 4-2. Location of the GIGAchannel Diagnostic LEDs
- Figure 4-3. Viewing and Interpreting the GIGAchannel Diagnostic LEDs
- Figure 4-4. Location of Crosstown (XIO) Status LEDs
- Figure 4-5. Ethernet 10-Base-T/100-Base-TX Port LEDs
- Figure 4-6. Compression Connector Used on XIO Boards
- Figure 4-7. Position for Compressed Air Can When Cleaning Compression Connector
- Figure 5-1. Cable Connections and Spring Clips on the SCSI Backplane
- Figure 5-2. Disconnecting a Fan and Fan Power Cable (Some Components Not Shown For Clarity)
- Figure 5-3. Removing a Fan From the System (Some Components Not Shown For Clarity)
- Figure 5-4. Unfastening the PCI Plenum Divider Sheetmetal
- Figure 5-5. Removing the PCI Plenum Divider
- Figure 5-6. Disconnecting Cables From the Logic Carrier
- Figure 5-7. Unfastening the Logic Carrier
- Figure 5-8. Removing the Logic Carrier
- Figure 5-9. Lowering a Logic Carrier Into the System
- Figure 5-10. Fastening the Logic Carrier
- Figure 5-11. Attaching the Logic Carrier Cables
- Figure 5-12. Installing the PCI Plenum Divider
- Figure 5-13. Fastening the PCI Plenum Divider
- Figure 5-14. Removing the Origin200 Power Supply Screws
- Figure 5-15. Removing the Origin200 Server Power Supply
- Figure 5-16. Replacing the Origin200 Server Power Supply Screws
- Figure 5-17. Removing the Front Bezel Crossbar
- Figure 5-18. Removing the System Controller Assembly From the Chassis
- Figure 5-19. Removing the Module System Controller Board From Its Carrier
- Figure 5-20. Removing the NIC From the Module System Controller
- Figure 5-21. Unfastening the Power Supply Shroud
- Figure 5-22. Lifting the Power Supply Shroud From the GIGAchannel Chassis
- Figure 5-23. Unplugging the Blower Power Connector
- Figure 5-24. Removing the Blower Cover
- Figure 5-25. Removing the Blower from the GIGAchannel Cabinet
- Figure 5-26. Replacing the Blower
- Figure 5-27. Reattaching the Blower Power Cable
- Figure 5-28. Replacing the Blower Cover
- Figure 5-29. Removing the Power Supply Shroud Screws
- Figure 5-30. Removing the Power Supply Shroud
- Figure 5-31. Disconnecting the Power Cord Extension
- Figure 5-32. Removing the GIGAchannel PCI Backplane
- Figure 5-33. Replacing the PCI Backplane
- Figure 5-34. Removing the Blower Cover
- Figure 5-35. Removing the Power Supply Shroud Screws
- Figure 5-36. Removing the Power Supply Shroud
- Figure 5-37. Unfastening the Midplane Captive Screws
- Figure 5-38. Lifting the Midplane out of the GIGAchannel Chassis
- Figure 5-39. Installing a Midplane in a GIGAchannel Chassis
- Figure 5-40. Midplane Captive Screws
- Figure 5-41. Location of the Crosstown Board and Captive Fasteners
- Figure 5-42. Removing the Crosstown Board
- Figure 5-43. Location of the Fuse Cover in the GIGAchannel Expansion Chassis
- Figure 5-44. Removing the Fuse Cover From a GIGAchannel Expansion Chassis